Canoes are carried upside down. Kayaks are carried upright or strapped together side by side
on the SUT-250-M-2 dual canoe and kayak carrier. This model can carry
two canoes or up to four kayaks, or you can mix canoes and
kayaks. See our Model SUT-220-S for
carrying a single kayak upright.
SUT-250-M-2
has a "soft" suspension for light boats
SUT-350-M-2
for longer boats and higher capacity
SUT-250-M-2 and SUT-350-M-2 Trailers come standard with two 33"vertical risers
Risers are easily removed
All Aluminum, All Bolted Construction, All
Adjustable
Model SUT-250-M-2 Multiple Canoe Trailers
has epoxy coated leaf springs,
giving it a carrying capacity of up to 250 lbs. SUT-350-M-2 has a 350 lb
capacity and a longer tongue. This
trailer is packaged for UPS shipment, and is easily assembled using only
simple tools. Since the Dual Canoe Trailer is made of aluminum, it is
maintenance-free in addition to being strong and lightweight. It's light
weight allows towing with today's smaller vehicles. Trailer also has two center Vertical Supports
for tie down support . The two vertical risers can be
positioned at any point along the T bars. You could add an additional set
of MKP vertical risers to the Trailer to provide vertical support on both
outer ends of the T-Bars.
Bearing Protection System
Included on Every Trailer
Sure Lube low pressure bearing lubrication system. Protects bearings and prevents
any seal damage.
Easy to use. A Zerk Fitting is located under the axle's end cap. Removing the end cap allows you to use a
small grease gun to lubricate the bearings.
The new grease pushes the old grease out.
* BMK is a kit that allows you to mount your own box to
the Model SUT-250-M-2 or SUT-350-M-2 Trailer. You can mount low cost metal or plastic truck
storage boxes available from most large stores or automotive stores. These
boxes are typically 72" long, so although they would fit canoe paddles,
kayak paddles would have to be of the take-apart type. Alternatively, you
could build your own box and mount it to the trailer with this kit.
NOTE: Box weight plus boats cannot exceed 250 lbs on SUT-250-M-2 and 350 Lbs on
SUT-350-M-2. Box can be mounted anywhere along the tongue - even
under the boats - check dimensions before obtaining a box.
Kit consists of a front crossbar and 4 brackets.. The box
mounts atop the tongue in the same direction as your boats.
Typical Storage Box mounted on the Trailex
SUT-250-M-2 Trailer
** 30TPAK contains 30 each T-Bolts & Locknuts for
attaching your options on the trailer. We do not recommend drilling holes
in the aluminum extrusions. The T-Bolts will slide to any position on any
of the extruded parts to allow you to fasten your own options such as
kayak cradles or other items.
FWSC Option
Set of Four Clips
Optional Tie Down points for Web Straps or Bungee Cords - Use
to add extra tie down points to secure boat.
Easily adjusts to any position by sliding.
FWSC Option includes Four Sliding Square Eyebolts. These can
be installed on any side of a member on the unit that has a
slot and then locked in place by tightening the nuts.
NOTE This
Trailer comes with Six Web Strap Clips (6) already included
Application Information
Select Model SUT-250-M-2 for combined
weight of up to 250 lbs Will carry two Canoes up to 17' in length
Longer Canoes - use safety flags
Select Model SUT-350-M-2 for combined
weight of up to 350 lbs
Will carry two Canoes up to 20" in length
Longer Canoes - use safety flags
Two Canoes are carried upside down, side by
side.
Canoes & Kayaks can be mixed or matched.
See Action Videos
Trailex Trailer Owners love to post Videos.
See the Latest Action Videos
Set of Four Clips
